Uskoro nam dolazi GAUI GU-INS!!
● GAUI GU-INS supports X-type flying Quad-copter (GAUI 330X, 500X), it can be extended for use on Hexa-copter, Octo-copter etc…. (Please reference GAUI product version/optional purchase module).
● OSD (On-screen display, optional purchase module) electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.
● Onboard USB interface connector for firmware update.
● Interface provided to connect with standard receiver and JR satellite receiver.
● Specifications：
1. Dimensions：Main controller: 53.5 x 38.5 x 12mm
GPS antenna: 42 x 34 x 15mm
Weight：Main controller: 27g (w/o cables ), GPS antenna: 23g (with cable)
2. Frequency: 300Hz output to ESC
3. Operating temperature: -20~80°C
4. Operating modes: Rate (manual) mode, Auto balance mode, GPS positioning mode.
5. Rate (manual) mode: Max angular velocity: 300 degree/sec
6. Auto balance mode: Max tilt angle: 60 degree.
7. GPS positioning mode:
a. Hovering accuracy: Horizontal: ±1m, Vertical: ±0.5m
b. Max yaw angular velocity: 250 degree/sec
c. Max tilt angle: 45 degree.
d. Max horizontal speed: 10 m/s，36 km/hr
e. Max vertical speed: 8 m/s (horizontal posture)
8. GU-INS provides pitch and rolls output signals, can work with different types of camera mounts.
9. Fail-safe functions: Automatic Go-Home, Signal lost Go-Home, Low voltage protection.
10. Suitable wind condition: < 10 m/s
● Features:
1. Easy to install and setup, no need of software on PC for adjustment.
2. All functions can be setup & confirmed by LED lights indication.
3. All in one design (combined inertial measurement unit and main controller) with simple cable wiring.
